Submission Information

Concrete Submission Information

The concrete register is applicable to the following Transport for NSW specifications:

Depending on the specification requirements, Transport for NSW typically requires the following details for the assessment of compliance:

  1. Concrete design overview – specification details, placement, handling, batching etc
  2. Statement of Compliance from Contractor or Supplier
  3. Verification Checklist
  4. Test Certificates for Concrete Mix, Cements & SCMs, Coarse Aggregates, Fine Aggregates, Admixtures and Water
  5. Essential mix data provided by email

Submit your mix information in PDF format to the appropriate discipline contact as follows:

Asphalt Submission Information

The asphalt register is applicable to the following Transport for NSW specifications.

Submit your nominated mix submission to:

The nominated mix submissions must include all requirements listed in clause 2.3 of the relevant asphalt specification:

You can use the following forms to submit your mix submissions:

Please ensure you also send the associated test reports to validate any values entered into the above forms.

Granular Materials Submission Information

The granular materials register is applicable to Transport for NSW specification 3051 Granular Base and Subbase Materials for Surfaced Road Pavements.

Submit your nominated material submission to James Allen at James.ALLEN@rms.nsw.gov.au or 02 8837 0970

Sealing Aggregates Submission Information

The sealing aggregates register is applicable to Transport for NSW specification 3151 Cover Aggregate for Sprayed Bituminous Surfacing.

You can use the following forms to submit your mix submissions:

Submit your nominated material submission to Sai Yin at Sai.YIN@rms.nsw.gov.au or 02 8837 0979

Please ensure you also send the associated test reports to validate any values entered into the above forms.

Share this page: